Avonmore Electrical Integrated Standards

donal | December 14, 2011 | 0 Comments

Having already held the ISO 9001:2008  standard , Avonmore Electrical  is proud to announce we have been awarded Certificates of Registration from NSAI in
Occupational Health and Safety Assessment Series 18001:2007
And
Environmental Management System ISO 14001:2004
 Avonmore Electrical is Certified to carry out the following scope of work under the three standards of Quality, Safety and Environment.
General rewind, [...]

Appointment of Avonmore Electrical as ABB Motors Authorised Repairer

donal | October 26, 2011 | 0 Comments

Appointment of Avonmore Electrical as ABB Motors Authorised Repairer

At the official appointment of Avonmore Electrical as ABB Motors Authorised Repairer, are John Conboy,ABB Ireland LBU Manager Drives and Motors, Aine Collins,TD, Alan Philpott,Avonmore Electrical Business Developement Manager, Eoin Leahy,ABB Area Manager, Drives and Motors, Sean Sherlock TD,Junior Minister for Enterprise, Michael Twohig,Avonmore Electrical Financial Controller, [...]

Avonmore Electrical – ABB Motors Authorised Repairer

donal | October 26, 2011 | 0 Comments

 

” We are proud to announce that rewind specialists Avonmore Electrical, have recently been awarded the title of  ABB Motors Authorised Repairer’ and is authorised to carry out overhaul and maintenance, parts reclamation and rewinds for the following motors and generators:
Low Voltage Motors:
 Safe Area low voltage motors up to frame size 450
 Flameproof Ex d, Ex [...]

Contracts Manager Appointed

donal | October 4, 2011 | 0 Comments

Dave Connell appointed as Contracts Manager
Avonmore Electrical is delighted to announce the appointment of Dave Connell as Contracts Manager.Dave is a Mechanical Engineer and has over 12 years experience working with Water and Waste Water Treatment Plants Design and Maintenance.

New Submersible Pump Test Well

donal | October 4, 2011 | 0 Comments

New Submersible Pump Test Well Two underground tanks with 9000 Gallon Storage have been installed,complete with 132Kw Variable Speed Drive Power Supply to facilitate the Full Load Testing of Submersible Pumps.Through the use of a Flowmeter and a Pressure Guage,each pump repair/overhaul will generate a performance curve which can be compared to its original Manufacturer’s [...]

Avonmore Electrical will be present at the Energy Show in the RDS this month

Joanie | March 10, 2011 | 0 Comments

Avonmore Electrical in conjunction with Crouzet will be present (Stand K2) at the Energy Show 2011 in the RDS on Wednesday 30th and Thursday 31st March 2011.
Presented by SEAI (Sustainable Energy Authority of Ireland) the Energy Show is a must for industry and business to see and learn about the latest sustainable energy technologies and practices.  
Mr John Doody Head [...]

New Precision Engineering Workshop at Avonmore Electrical

Joanie | February 28, 2011 | 0 Comments

In January 2011, Avonmore Electrical moved its Precision Engineering operations to a new integrated workshop, on the existing Avonmore site at Roskeen, Mallow Co Cork . The move of the new workshop not only integrates the services provided, but also acts as an upgrade of existing facilities and increases operational efficiencies as electrical and mechanical [...]

Pyrolysis Oven

Joanie | February 28, 2011 | 0 Comments

Pyrolysis is the thermal decomposition of organic materials in a low-oxygen environment. In the process of traditional burning-out of materials, the binding agents (e.g. varnish, resin, paint and plastic) will combust (due to the high oxygen content), so that the heating of the materials will not be equal. This unequal heating (hot spots) may cause [...]

Vacuum Pressure Impregnation (V.P.I)

Joanie | February 28, 2011 | 0 Comments

V.P.I allows Avonmore Electrical to offer the ultimate rewind electrical performance and quality. All motors/generators are processed under vacuum and pressure with solvent less epoxy resin to provide void-free electrical windings. The V.P.I process provides maximum penetration of resin throughout the turns of individual windings. V.P.I is superior to solvent varnishes and the conventional “dip [...]

Avonmore Electrical attends BWEA (British Wind and Energy Association) Annual Conference and Exhibition

Joanie | November 12, 2010 | 0 Comments

Avonmore Electrical recently attended the BWEA (British Wind and Energy Association) 32nd annual 3 day conference and exhibition in Glasgow. The event was held in the Scottish Exhibition & Conference Centre (SECC) between 2nd – 4th November where over 300 exhibitors were present and some 4,200 delegates were registered for this event.
Throughout the 3day event [...]